Powder Coating Equipment
 Spray Booths
 Turnkey Systems
 Raw Material
 Air Compressors
 Dust Collection, Filters and  Filter cloth
 Pre treatment Chemical 
 Masking Products

 Touchup Paints
 Powder Coating Removal
 Powder Coating Units
 Powder Manufacturers
 Powder Coating Suppliers
 Testing Equipment
 Testing Labs
 Used/Surplus equipment
 Books Periodicals
Performance / Specialty coatings


 Powder Removal
Various Chemicals are effective at removing powder coating, however most other organic solvents (acetone, thinners, etc.) are completely ineffective.Certain low grade powder coats can be removed with steel wool, though this might be a more labor-intensive process than desired. Powder coating can also be removed by a burning off process, in which parts are put into a large high-temperature oven with temperatures typically reaching an air temp of 1100 to 1500 degrees with a burner temperature of 900. The process takes about four hours and requires the parts to be cleaned completely and repowdered. Parts made with a thinner-gage material need to be burned off at a lower temperature to prevent the material from warping.
This page will provide information about manufactureres who are into powder removal chemicals. <more>
Miles Chemical Solutions LLC.
E-mail: Sam@MilesChemicalSolutions.com
Tel.: 248-765-9946